In-film affixing is a new type of label packaging that is different from traditional direct silk screen printing, heat shrink label and self-adhesive label. It has been popular in Europe and America for many years. After two or three years of watching, it has finally begun to be larger. Scale application. In-mold paste is mainly used for blow molding and injection molding of PP, PE, PET and other materials. That is, before the blow molding and injection molding, the already printed in-mold label is placed in the blowing and injection molding cavity. When the mold is blown and injected, the mold is labeled with special high temperature and high pressure. The viscose melts and fuses with the surface of the bottle or injection molded part. When the mold is opened, a beautifully printed bottle or injection is completed in one time. In the past one or two years before and after 05, the film was used as an anti-counterfeiting function in China. Because the printing technology was difficult to meet the standards of labeling in the film, and special machine injection molding was required. In 2009, most members of the EU banned the tableware of melamine. Imported, resulting in the rapid development of PP material in the film paste process. The film inside the product is really integrated into people's lives.
1. A novel and beautiful appearance.
Since the in-mold label and the plastic part are naturally integrated, the deformation of the bottle body is deformed, so that foaming and wrinkling do not occur. At the same time, the in-mold labeling and printing is exquisite, and can be used for special treatments such as laser and aluminum plating, so that the product packaging grade is greatly improved;
2. Anti-counterfeiting function.
In-mold labeling system is relatively complicated, reducing the possibility of fraud, which provides a very reliable brand maintenance means for users who pursue quality, quality and brand-oriented plastic packaging products;
3. Peace and environmental protection.
The common label is to be labeled after the container is formed, and the in-mold label and the container are molded once, thereby preventing contamination of the bottle by the labeling process. Moreover, the in-mold label and the bottle body are completely integrated with the same chemical composition, can be recycled together, and have high recycling efficiency.
4. Not easy to fall off and damage
. The in-mold label has the properties of waterproof, oil proof, mildew proof, acid and alkali resistance, friction resistance, etc., and is not easily damaged under special conditions.
5. The side walls are reinforced.
The label is embedded in the side wall of the plastic container to increase the crush resistance of the side wall of the container by 20% so that the label does not separate when the container is warped and squeezed.
